Product Description

This 2013 Evinrude E-TEC 250 HP H.O. is a low-hour, high-performance outboard with only 220 genuine hours. The 250 H.O. is part of Evinrude's 3.4L E-TEC direct-injection V6 platform, combining the responsive power delivery and torque of a two-stroke with advanced electronic fuel injection and engine management.

The engine has been compression tested with excellent, even results across all six cylinders: 125 / 124 / 125 / 125 / 126 / 126 PSI. The engine's electronic control system has also been recently checked by authorized technicians and reported as fully operational, with a diagnostic printout available.

This motor has seen freshwater use for most of its life, has been serviced, and is ready to mount and run. It also comes with an extensive rigging package, including five i-Command gauges, Lowrance Point-1 GPS antenna, EP-65R electronic sensor, EP-85R storage device, NMEA wiring/backbone, remote wiring harness, remote control box, key and kill-switch fob, and a 17" stainless-steel Renegade Offshore 4-blade propeller.

The 3.4L E-TEC 250 H.O. platform is a V6 direct-injection two-stroke designed for strong acceleration, high torque, and serious performance applications. Factory specifications for the 3.4L 250 H.O. platform list a 5300–6000 RPM full-throttle operating range, electric starting, direct injection, power trim and tilt, and a 1.85:1 gear ratio.

TECHNICAL SPECIFICATIONS

• Brand: Evinrude
• Model: E-TEC 250 H.O.
• Model Year: 2013
• Horsepower: 250 HP
• Engine Type: V6 2-Stroke E-TEC Direct Injection
• Displacement: 3.4L / 210 cu. in. / 3,441 cc
• Cylinders: 6
• Shaft Length: 25" Extra-Long Shaft
• Engine Hours: 220 Genuine Hours
• Compression: 125 / 124 / 125 / 125 / 126 / 126 PSI
• Starting: Electric
• Fuel System: E-TEC Direct Injection
• Steering: Remote
• Trim & Tilt: Power Trim & Tilt
• Full-Throttle RPM Range: 5,300–6,000 RPM
• Gear Ratio: 1.85:1
• Alternator Output: Up to 133 amps total
• Recommended Fuel: 87 Octane
• Recommended Oil: Evinrude/Johnson XD-100
• Usage: Freshwater for most of its life
• Condition: Used, serviced and ready to run
• Warranty: 1-Year Warranty

The core 3.4L 250 H.O. specifications are supported by Evinrude/BRP documentation, including the 210 cu. in. displacement, six-cylinder E-TEC configuration, direct injection, 25" shaft availability, electric starting, and 1.85:1 gear ratio.

FEATURES

• 250 HP High Output E-TEC
• 3.4L V6 direct-injection two-stroke
• Only 220 genuine hours
• Excellent and even compression across all six cylinders
• 25" shaft
• Electric start
• Power trim and tilt
• Remote steering and controls
• Electronic engine management
• Recently computer/diagnostic checked
• Diagnostic printout available
• Freshwater use for most of its life
• Serviced and ready to run
• Five i-Command gauges included
• Lowrance Point-1 GPS antenna
• EP-65R electronic sensor
• EP-85R storage device
• NMEA wiring and backbone
• Remote wiring harness
• Side- or top-mount remote control box
• Key and kill-switch fob
• 17" stainless-steel Renegade Offshore 4-blade propeller
• Original manuals included
• Complete equipment package for installation and operation
• 1-Year Warranty

WHY YOU'LL LOVE IT

The biggest advantage of this E-TEC 250 H.O. is its combination of low hours, strong compression, documented diagnostic inspection, and extensive included rigging.

With only 220 hours, compression within a very tight six-cylinder range, freshwater use for most of its life, and recent service, this is an especially interesting option for someone looking for a high-output Evinrude without starting from scratch on the rigging.

The included i-Command gauges and NMEA electronics add significant value and make this more than just a bare replacement engine.

PERFORMANCE & APPLICATIONS

The Evinrude E-TEC 250 H.O. was designed for boaters who want strong acceleration, immediate throttle response and high-output performance. The 3.4L V6 direct-injection platform is particularly well suited to performance-oriented applications where strong low- and mid-range torque and rapid acceleration are important. Evinrude's period documentation describes the 250 H.O. as a high-performance model, with the 3.4L platform rated at 250 HP and a 5,300–6,000 RPM operating range.

COMPATIBLE BOAT TYPES

This 250 HP E-TEC H.O. can be suitable for properly rated:

• Bass boats
• Performance fishing boats
• Offshore fishing boats
• Center consoles
• Bay boats
• Flats and technical fishing boats
• High-performance recreational boats
• Other vessels designed and rated for a 250 HP outboard

Always confirm your boat's maximum horsepower rating, transom height, mounting requirements, steering system and rigging compatibility before installation.

CONDITION

Used – Serviced and Ready to Run

This Evinrude has 220 genuine hours and has been used in freshwater for most of its life.

Compression testing produced the following results:

125 / 124 / 125 / 125 / 126 / 126 PSI

The engine's electronic control system has also been recently checked and reported as fully operational, with a diagnostic printout available.

WHAT'S INCLUDED

The sale includes the complete outboard package with the equipment required to mount and operate the motor, including:

• Evinrude E-TEC 250 H.O. outboard
• Remote wiring harness
• Remote control box — side or top mount, buyer's choice
• Key and kill-switch fob
• Five i-Command gauges
• Lowrance Point-1 GPS antenna
• EP-65R electronic sensor
• EP-85R storage device
• NMEA wiring and backbone
• 17" stainless-steel Renegade Offshore 4-blade propeller
• Original manuals
• Additional equipment required for installation and operation

WARRANTY

1-Year Warranty Included

This used Evinrude E-TEC 250 H.O. is backed by a 1-year warranty from EZ Boats Marine.

SHIPPING INFORMATION

We offer flat-rate shipping of $350 per motor throughout the continental United States.

For shipping questions, installation questions or additional product information, contact support@ezboatsmarine.com.

IMPORTANT DELIVERY INFORMATION

Before purchasing, customers should confirm that the 25" shaft length, 250 HP rating, steering configuration and included rigging are compatible with their boat.

Please inspect the shipment upon delivery and report any shipping-related damage promptly.

WHY BUY FROM EZ BOATS MARINE?

• Professionally inspected used outboard motors
• Complete ready-to-run packages
• Compression and diagnostic information when available
• Quality used marine engines
• 1-Year Warranty on used motors
• Flat-rate $350 shipping throughout the continental United States
• Support before and after your purchase
• Rigging packages available to simplify installation

FREQUENTLY ASKED QUESTIONS

How many hours does this Evinrude have?

This motor has 220 genuine hours.

What is the compression?

Compression readings are 125 / 124 / 125 / 125 / 126 / 126 PSI across the six cylinders.

Is this the High Output model?

Yes. This is the 250 HP E-TEC H.O. model.

What is the shaft length?

This motor has a 25-inch extra-long shaft.

Is it a 2-stroke or 4-stroke?

It is a 3.4L V6 E-TEC direct-injection two-stroke.

Has the engine been computer checked?

Yes. The engine's electronic control system was recently checked by authorized technicians and reported as fully operational, with a diagnostic printout available.

Does it include controls and gauges?

Yes. The package includes the remote control box, wiring harness, five i-Command gauges, key/kill-switch fob and additional NMEA/electronic rigging.

Does it include a propeller?

Yes. A 17" stainless-steel Renegade Offshore 4-blade propeller is included.

Has the motor been used in saltwater?

The motor is reported to have been used in freshwater for most of its life.

Does it come with a warranty?