2016 Mercury 250 Pro XS Optimax Outboard Engine 20"Clean/ 284 Hours

2016 Mercury 250 Pro XS Optimax Outboard Engine 20″Clean/ 284 Hours

Rated 5 out of 5 based on 1 customer rating

$10,950.00

Need Assistance?

📞 +1 (216) 455-7726

✉ support@ezboatsmarine.com

SKU: 178230902669 Category: Used Mercury Outboard Motors Brand: Mercury

2016 Mercury 250 Pro XS OPTIMAX (V6)/ 3.0L

2-Stroke Outboard Engine – Used

TORQUEMASTER GEN.2 1.75R Lower Unit

3-Ram Trim System

L/ 20″ Shaft Length Model Engine

Mercury Warranty Expired.

Engine Hours: 284

Price: $10,950.00

We
are a Mercury Outboard dealer and just took this engine on trade. The
customer decided to upgrade to new Mercury 250 fourstroke engine. This engine is very clean and we just fully serviced it. The engine is
ready for installation/ use.

We just performed a complete service on this engine per Mercury Spec. 300 Hour Engine Service. The fuel filter, air filter, drive belt, spark plugs, thermostats/ gaskets, engine mounted anodes, water pump
assembly, and
a gear lube/ seals were all replaced. The engines run great and compression is perfect.
This is a very clean used engine. The engine is ready
to be installed for use.

Compression Test Results:

Cyl. #1: 130 psi Cyl. #2: 130 psi

Cyl. #3: 130 psi Cyl. #4: 125 psi

Cyl. #5: 130 psi Cyl. #6: 125 psi

———————

Mercury 250 PRO XS (3.0L) Outboard Engine

FEATURES

Features the SmartCraft Engine Guardian system, which monitors engine functions to forewarn of possible problems that could lead to engine damage
The direct fuel injection air compressor features a lightweight pulley, along with the use of maxi-coated carbon steel bolts for enhanced compressor durability
Electronic multipoint lubrication system delivers precise amounts of oil where and when it’s needed.
High-performance rubber-coated reed blocks cushion five-petal, single-stage carbon fiber reeds for enhanced reed life without sacrificing performance
A heavy-duty propshaft enhances the durability of the 3.0-liter Sport Master gearcase
3.0L (185 CID) powerhead delivers unmatched power, performance, durability and reliability
The 60-amp, belt-driven alternator is the most powerful in its class
The Mercury-exclusive PCM microprocessor provides the ability to optimize fuel, spark timing and knock control for each cylinder independently, enhancing engine running quality and performance
Exceeds the fuel efficiency of many of today’s large four-stroke engines
Runs on 87-octane fuel
SmartCraft Control Area Network (CAN) system, a network of sensors and actuators, proactively monitors and controls multiple engine functions
Comes equipped with a 14-pin Deutsch connector harness, which incorporates engine ignition and the SmartCraft CAN wiring in one connector
Solid engine mounts improve engine response and overall boat performance at higher speeds
A unique two-stage, direct-injection system atomizes fuel into small, uniform particles, resulting in complete and instantaneous combustion
The fuel/air mixture is injected into the combustion chamber at 95 psi (15 psi higher fuel/air differential than standard DFI or OptiMax product) for enhanced high-RPM running quality
Suitable For: Bass Boats, Single Engine Catamaran Sport Boats, River Racers, Single Engine Vee Bottom Sport Boats

SPECIFICATIONS

Propshaft Rated Horsepower (HP / kW): 250 (187 kW)
Full Throttle RPM Range: 5,000-6,000
Cylinders: V-6 (60 degree vee)
Displacement: 193 cu. in. (3160cc)
Bore & Stroke in/mm: 3.63 x 3.00/ 92 x 76 mm
Fuel Induction System: 2-Stage Direct Fuel Injection
Ignition System: PCM Digital Inductive
Charging System: 60-amp (756 watt) w/Voltage Regulator
Gear Ratio: 1.75:1
Lubrication System: Electronic Multipoint
Recommended Oil: Mercury Racing 2-Stroke Oil
Fuel Requirements: 87 Octane Minimum (R+M)/2 (96 RON)
Rotation: Right-hand (TM)
Shaft Length (inches): 20
Shaft Length (mm): 508
Weight (lbs / kg): 505 lbs. (229 kg)

	—————– Manufacture Date of Engine: 04/06/2016 ———– Prices do not include installation. ———– Contact us to purchase and schedule an appointment for pickup/installation. ———– Controls, Cables, Parts and Labor to install engine is at an additional cost. ———– Contact Donnie Carter before purchasing this engine to discuss that this engine model is correct for your application. Offshore Performance Specialties Fort Myers, FL

“Shipping is dependent on location, lift gate or not, residential or business. We will send an invoice once we get an address to do a freight quote with.”

International Orders – Duties and Customs Fees Are the Responsibility of the Buyer
</