Used 2007 Mercury 250 HP Pro XS OptiMax 2-Stroke Outboard Motor – 20" Shaft – Remanufactured Powerhead – Freshwater – Fully Serviced

Product Description

This 2007 Mercury 250 HP Pro XS OptiMax 2-Stroke Outboard Motor has been significantly upgraded with a professionally remanufactured powerhead and thoroughly serviced from top to bottom. Unlike a standard used 250 Pro XS, this motor has received extensive mechanical attention, including a remanufactured powerhead, professionally cleaned and flow-tested air and fuel injectors, new spark plugs, VST tank service, new thermostats, a new water pump, lower-unit pressure testing, and fresh gear oil. The motor has a freshwater-use history and is reported to be free of the corrosion concerns commonly associated with heavily used saltwater outboards. The 20-inch shaft configuration makes this engine suitable for compatible boats designed for a 20" transom. It features Mercury's 3.0L V6 OptiMax direct-fuel-injection platform, power trim and tilt, electric starting, remote steering, and SmartCraft-compatible electronics. The factory break-in reset has also been completed following the powerhead replacement. This is a turn-key, ready-to-run 250 Pro XS package backed by a 1-year warranty from EZ Boats Marine.

TECHNICAL SPECIFICATIONS

• Brand: Mercury
• Model: 250 Pro XS OptiMax
• Model Year: 2007
• Horsepower: 250 HP
• Engine Type: 2-Stroke
• Configuration: 60° V6
• Displacement: 3.0L / 3,032 cc / 185 cu. in.
• Fuel System: 2-Stage Direct Fuel Injection (DFI)
• Shaft Length: 20" Long Shaft
• Engine Hours: Not Specified
• Powerhead: Professionally Remanufactured
• Compression: Not Specified
• Starting System: Electric Start
• Steering: Remote
• Trim & Tilt: Power Trim and Tilt
• Full-Throttle Range: 5,500–6,000 RPM
• Gear Ratio: 1.75:1
• Charging System: 60 Amp / 756 Watt
• Gear Selection: Forward / Neutral / Reverse
• Lubrication: Electronic Multipoint Oil Injection
• Fuel Requirement: 87 Octane Minimum
• Use History: Freshwater
• Condition: Used / Remanufactured Powerhead / Fully Serviced
• Warranty: 1-Year Warranty

Mercury's specifications for the 250 Pro XS identify the engine as a 60° V6 with 3,032 cc displacement, 250 HP, 5,500–6,000 RPM full-throttle range, 1.75:1 gearing, 60-amp charging, electric start, remote steering, power trim, and 20"/25" shaft availability.

FEATURES

• Mercury 250 Pro XS
• 2007 model
• 3.0L 60° V6
• 250 HP
• 2-Stroke OptiMax
• 2-stage Direct Fuel Injection
• 20" long shaft
• Professionally remanufactured powerhead
• Air injectors cleaned and flow-tested
• Fuel injectors cleaned and flow-tested
• New spark plugs
• VST tank serviced
• New thermostats
• New water pump
• Lower unit pressure tested
• Fresh gear oil
• Factory break-in reset completed
• Freshwater-use history
• Electric start
• Remote steering
• Power trim and tilt
• 60A charging system
• SmartCraft-compatible platform
• Turn-key ready-to-run configuration
• 1-year warranty

WHY YOU'LL LOVE IT

The Mercury 250 Pro XS OptiMax is a high-performance 3.0L V6 platform built for serious performance and demanding boat applications. What makes this particular motor stand out is the professionally remanufactured powerhead combined with extensive service work. Rather than purchasing a high-hour 250 Pro XS in unknown condition, you're getting a motor that has received major mechanical attention before being offered for sale. The injector service, VST service, new thermostats, new water pump, fresh spark plugs, and fresh gear oil provide additional confidence that the major systems have been addressed. The freshwater history is another significant advantage, particularly for buyers concerned about corrosion.

PERFORMANCE & APPLICATIONS

The Mercury 250 Pro XS is designed for high-performance applications where strong acceleration, high-speed capability, and substantial power are required. Ideal applications include:

• Performance bass boats
• High-performance fishing boats
• Large center consoles
• Offshore fishing boats
• Bay boats
• Performance flats boats
• Tournament fishing boats
• High-performance recreational boats
• Other boats rated for 250 HP

The 3.0L V6 OptiMax produces 250 HP at the propeller shaft and operates within a 5,500–6,000 RPM full-throttle range.

COMPATIBLE BOAT TYPES

• Bass boats
• Large center consoles
• Performance fishing boats
• Bay boats
• Offshore boats
• Tournament fishing boats
• High-performance hulls
• Other boats rated for 250 HP

Important: Always verify your boat's maximum horsepower rating, transom height, steering system, controls, and rigging requirements before purchase.

CONDITION

Used – Remanufactured Powerhead / Freshwater / Fully Serviced This 2007 Mercury 250 Pro XS has undergone substantial mechanical work. The powerhead has been professionally remanufactured, followed by extensive service and inspection. Recent work includes:

• Remanufactured powerhead
• Air injectors cleaned and flow-tested
• Fuel injectors cleaned and flow-tested
• New spark plugs
• VST tank serviced
• New thermostats
• New water pump
• Lower unit pressure tested
• Fresh gear oil
• Factory break-in reset completed

The engine has a freshwater-use history.

WHAT'S INCLUDED

• Mercury 250 Pro XS 3.0L V6 outboard
• 20" long shaft
• Complete operating controls and rigging
• Key/start system
• Propeller
• Battery and fuel-system equipment required for operation
• Mounting hardware
• Stand

The motor is supplied as a complete package intended to include everything required to mount and run the engine without having to source essential operating equipment separately.

WARRANTY

1-Year EZ Boats Marine Warranty This used outboard is backed by a 1-year warranty from EZ Boats Marine. Warranty coverage and exclusions should be reviewed with EZ Boats Marine before purchase.

SHIPPING INFORMATION

We offer flat-rate shipping of $350 per motor throughout the continental United States. Please contact us for shipping arrangements, delivery estimates, and orders outside the continental United States.

IMPORTANT DELIVERY INFORMATION

• Verify your boat is rated for a 250 HP outboard.
• Confirm that your boat requires a 20" shaft.
• Verify steering and control compatibility.
• Confirm electrical and SmartCraft compatibility.
• Inspect the engine and included components immediately upon delivery.
• Verify all rigging components before installation.
• Professional installation is recommended.
• Follow Mercury's required break-in procedure for the remanufactured powerhead.
• Confirm the propeller is correctly matched to the boat and engine.

WHY BUY FROM EZ BOATS MARINE?

• Complete ready-to-run outboard packages
• Professionally prepared used motors
• Remanufactured powerhead packages available
• 1-year warranty on used motors
• Major service work completed before sale
• Freshwater-use inventory
• Complete rigging packages
• Flat-rate continental U.S. shipping
• Support before and after your purchase

FREQUENTLY ASKED QUESTIONS

What horsepower is this motor?

This is a 250 HP Mercury Pro XS OptiMax.

What year is this Mercury?

This is a 2007 model-year Mercury 250 Pro XS.

Is the powerhead original?

No. The motor has been fitted with a professionally remanufactured powerhead.

What displacement is the 250 Pro XS?

The 250 Pro XS OptiMax uses a 3.0L / 3,032 cc 60° V6 platform.

Is this a 2-stroke?

Yes. It is a 2-stroke OptiMax Direct Fuel Injection engine.

What shaft length does it have?

This particular motor has a 20-inch long shaft.

Has the motor been used in saltwater?

The supplied history indicates freshwater use.

What service has been completed?

The motor has received a remanufactured powerhead, injector cleaning and flow testing, new spark plugs, VST service, new thermostats, a new water pump, lower-unit pressure testing, and fresh gear oil.

Has the powerhead been broken in?

The factory break-in reset has been completed following the powerhead replacement. The appropriate break-in procedure should still be followed during initial operation.

Does it have power trim and tilt?

Yes. The Mercury 250 Pro XS is equipped with power trim.

Does it have electric start?

Yes. The 250 Pro XS uses electric starting.

Does it come with controls and rigging?

The package is being sold as a complete ready-to-run setup with the required operating rigging and controls.

Does it have a warranty?

Yes. Used motors from EZ Boats Marine carry a 1-year warranty.

Is this motor ready to install?

Yes. It is being offered as a turn-key package intended to be ready to mount and run, subject to final boat fitment and component verification.