Mercury 25" Jet Drive Lower Unit | Fits 1994–2018 Mercury 200HP & 225HP V6 3.0L AR/BP Jet Models

Product Overview

Replace your worn or damaged jet drive with this genuine Mercury 25-Inch Jet Drive Lower Unit, designed for select 1994–2018 Mercury 200HP and 225HP V6 3.0L Jet Drive outboards. Compatible with Model AR and BP Jet applications, this OEM lower unit is an excellent replacement for restoring the performance of your Mercury jet-powered boat. This lower unit is compatible with both Direct Fuel Injection (DFI) and carbureted 2-stroke powerheads, making it suitable for a wide range of Mercury jet drive applications. It is not compatible with Mercury DTS (Digital Throttle & Shift) engines. Professionally inspected and ready for rebuilding or installation, this unit provides a solid OEM foundation for your next repair project.

---

Key Features

• Genuine OEM Mercury Jet Drive Lower Unit
• Fits Mercury 200HP & 225HP V6 3.0L Jet Models
• Compatible with AR & BP Jet Models
• 25-Inch Shaft Configuration
• Compatible with DFI and Carbureted 2-Stroke Engines
• ARX Stamped Driveshaft
• Professionally Inspected
• OEM Mercury Construction
• Ready for Rebuild or Installation

---

Technical Specifications

Specification	Details
Brand	Mercury
Product Type	Jet Drive Lower Unit
Condition	Pre-Owned
Engine Compatibility	V6 3.0L
Horsepower	200 HP / 225 HP
Model Years	1994–2018
Shaft Length	25 Inches
Driveshaft Length	Approximately 27 Inches
Driveshaft Stamp	ARX

Driveshaft length is measured from the top of the water pump to the end of the driveshaft.

---

Compatible Applications

Designed for select Mercury jet drive outboards including: Model Years

• 1994–2018

Horsepower

• 200 HP
• 225 HP

Engine

• V6 3.0L

Jet Drive Models

• Model AR
• Model BP

Compatible With

• Direct Fuel Injection (DFI) 2-Stroke Engines
• Carbureted 2-Stroke Engines

Not Compatible With

• Mercury DTS (Digital Throttle & Shift) Engines

Important: Always verify your engine's model number, serial number, shaft length, and OEM part number before purchasing. If you need assistance confirming compatibility, our team is happy to help.

---

Condition

This is a genuine OEM Mercury Jet Drive Lower Unit that has been professionally inspected. Condition details include:

• Structurally sound housing
• ARX stamped driveshaft
• Driveshaft measures approximately 27 inches
• Requires a new water pump impeller
• Lock nuts will need to be replaced
• Intake screens show cosmetic damage and should be replaced before installation
• Ready for rebuilding or installation with the recommended replacement components

Please review all product photos carefully to evaluate cosmetic condition before purchasing.

---

What's Included

Your purchase includes:

• Mercury 25-Inch Jet Drive Lower Unit
• ARX Driveshaft

Only the components shown in the product photos are included. Replacement impeller, lock nuts, and intake screens are not included.

---

Shipping Information

Every lower unit is carefully packaged to protect it during shipping. We offer fast shipping throughout the United States, with international shipping available upon request. For an accurate shipping quote, please provide:

• Country
• ZIP or Postal Code
• Commercial or Residential Address
• Whether liftgate service is required

---

Why Buy from EZ Boats Marine?

• Genuine OEM Mercury Marine Parts
• Professionally Inspected Components
• OEM Jet Drive Assemblies
• Secure Packaging
• Fast Nationwide and International Shipping
• Competitive Pricing
• Experienced Marine Customer Support
• Trusted Source for Outboard Motors and Marine Parts

EZ Boats Marine is committed to supplying premium OEM marine components backed by dependable service and expert technical support.

---

Frequently Asked Questions

Which Mercury engines does this jet drive lower unit fit?

This lower unit fits select 1994–2018 Mercury 200HP and 225HP V6 3.0L AR and BP Jet Drive outboards. Always verify your engine's model number, serial number, and OEM specifications before ordering.

Will this fit a Mercury Optimax or DFI engine?

Yes. This lower unit is compatible with Direct Fuel Injection (DFI) and carbureted 2-stroke Mercury powerheads that use the AR and BP jet drive configuration.

Will this fit a Mercury DTS engine?

No. This lower unit is not compatible with Mercury DTS (Digital Throttle & Shift) models.

Does this lower unit need any additional work before installation?

Yes. The unit requires a new water pump impeller, replacement lock nuts, and new intake screens, as the existing screens are damaged. These items should be replaced before the lower unit is put into service.

Is this an OEM Mercury component?

Yes. This is a genuine OEM Mercury Jet Drive Lower Unit designed for compatible Mercury V6 3.0L jet-powered outboards.