Product Description

Upgrade your boat with this 2014 Evinrude E-TEC 75 HP 2-Stroke Direct Fuel Injection (DFI) Outboard Motor, a lightweight, fuel-efficient, and dependable engine designed for fishing boats, aluminum boats, skiffs, pontoons, and utility vessels. With only 380 original operating hours, this outboard offers outstanding performance and reliability for boaters looking for a well-maintained, ready-to-install engine.

Powered by Evinrude's advanced E-TEC Direct Fuel Injection (DFI) technology, this 75 HP outboard delivers quick acceleration, excellent fuel economy, reduced emissions, and low maintenance compared to conventional two-stroke engines. The 20-inch shaft configuration makes it suitable for a wide range of popular boat models.

This engine has been fully serviced and professionally inspected to ensure dependable operation. It starts easily, idles smoothly, shifts correctly, pumps water properly, and performs exactly as it should. Compression has been tested at 130 PSI on all cylinders, confirming excellent internal engine condition.

Recent maintenance includes new spark plugs, a new thermostat, new fuel filter, fresh lower unit gear oil, and a new water pump with impeller, allowing you to install the engine with confidence.

This motor is sold as a complete, ready-to-mount-and-run package, including the control unit, control cables, wiring harness, ignition key switch, propeller, oil tank, and essential rigging components required for installation.

TECHNICAL SPECIFICATIONS

FEATURES

• 2014 Evinrude E-TEC 75 HP Outboard Motor
• Only 380 Original Hours
• 20-Inch Shaft
• Direct Fuel Injection (DFI)
• Electric Start
• Power Trim & Tilt
• Compression Tested (130 PSI on All Cylinders)
• New Spark Plugs
• New Thermostat
• New Fuel Filter
• New Water Pump & Impeller
• Fresh Lower Unit Gear Oil
• Professionally Serviced
• Complete Rigging Included
• Ready to Mount and Run

WHY YOU'LL LOVE IT

The Evinrude E-TEC 75 HP is known for delivering outstanding fuel efficiency, quick throttle response, and dependable reliability in a lightweight package. With only 380 hours and a complete recent service, this engine is an excellent choice for boaters seeking years of dependable performance with minimal maintenance.

PERFORMANCE & APPLICATIONS

Ideal for:

• Aluminum Fishing Boats
• Bass Boats
• Bay Boats
• Pontoon Boats
• Skiffs
• Utility Boats
• Small Center Console Boats
• Recreational Boats

Its lightweight design and responsive power make it an excellent all-around outboard for both freshwater and saltwater use.

COMPATIBLE BOAT TYPES

Recommended for:

• 16–21 ft Aluminum Boats
• Bass Boats
• Pontoon Boats
• Bay Boats
• Jon Boats
• Skiffs
• Small Utility Boats

CONDITION

This is a pre-owned 2014 Evinrude E-TEC 75 HP Outboard Motor in excellent mechanical and cosmetic condition.

The engine has only 380 original operating hours and has been professionally serviced with new spark plugs, thermostat, fuel filter, water pump, impeller, and fresh lower unit gear oil. Compression is an even 130 PSI across all cylinders, and the engine starts easily, idles smoothly, and performs exactly as designed.

WHAT'S INCLUDED

This motor is sold as a complete, ready-to-mount-and-run package.

Included with your purchase:

• 2014 Evinrude E-TEC 75 HP Outboard Motor
• Remote Control Unit
• Control Cables
• Main Wiring Harness
• Ignition Key Switch
• Oil Tank
• Stainless Steel Propeller
• Power Trim & Tilt System
• Standard Installation Hardware
• Complete Rigging Package

Everything needed for a professional installation is included.

SHIPPING INFORMATION

We offer flat-rate shipping of $350 per motor throughout the continental United States.

For all shipping enquiries, please contact:

Email: support@ezboatsmarine.com

IMPORTANT DELIVERY INFORMATION

Please inspect your shipment carefully upon arrival before signing for delivery. If any visible shipping damage is present, note it on the freight carrier's delivery receipt. In the event of concealed damage, contact EZ Boats Marine immediately so we can assist with the freight claim process.

WHY BUY FROM EZ BOATS MARINE?

EZ Boats Marine supplies premium new and used outboard motors that are professionally inspected, accurately described, and competitively priced. We are committed to providing reliable products, secure nationwide shipping, and exceptional customer support to ensure a smooth purchasing experience.

FREQUENTLY ASKED QUESTIONS

Is this engine ready to install?

Yes. The engine is sold as a complete, ready-to-mount-and-run package with the control unit, control cables, wiring harness, key switch, oil tank, propeller, and essential rigging included.

How many hours are on the engine?

The engine has only 380 original operating hours.

What maintenance has been completed?

The engine has been fully serviced with new spark plugs, thermostat, fuel filter, water pump, impeller, and fresh lower unit gear oil. Compression has also been tested at 130 PSI on all cylinders.

Do you ship throughout the United States?

Yes. We offer flat-rate shipping of $350 per motor throughout the continental United States.

How can I get more information before purchasing?

For additional photos, compatibility advice, or shipping information, please contact us at:

Email: support@ezboatsmarine.com