Product Description

Power your boat with confidence using this 2013 Evinrude E-TEC 90HP 2-Stroke EFI Outboard Motor, a dependable and fuel-efficient outboard designed for exceptional performance on the water. Featuring a 20-inch shaft, advanced Electronic Fuel Injection (EFI) technology, and excellent compression, this engine is an outstanding choice for aluminum fishing boats, bay boats, center consoles, pontoons, skiffs, and utility boats.

The Evinrude E-TEC series is widely recognized for its instant starting, strong acceleration, quiet operation, and low maintenance requirements. Its direct fuel injection system provides excellent fuel economy while delivering the power and responsiveness boaters expect from a premium outboard.

This engine has been thoroughly inspected and is ready to run. Compression has been tested and is excellent across all cylinders, confirming strong internal engine condition. The motor starts easily, idles smoothly, shifts properly, pumps water correctly, and the power trim and tilt system operates exactly as intended.

Unlike many listings that include only the engine, this outboard is sold by EZ Boats Marine as a complete, ready-to-mount-and-run package, allowing for an easier installation with everything needed to get your boat back on the water.

Whether you're replacing an older outboard or upgrading your current setup, this Evinrude E-TEC 90HP delivers dependable performance, proven reliability, and outstanding value.

TECHNICAL SPECIFICATIONS

FEATURES

• 2013 Evinrude E-TEC 90HP Outboard Motor
• 90 Horsepower
• 20-Inch Shaft
• Electronic Fuel Injection (EFI)
• Electric Start
• Power Trim & Tilt
• Excellent Compression
• Smooth Idle
• Strong Acceleration
• Fuel Efficient
• Low Maintenance Design
• Complete Rigging Included
• Ready to Mount and Run

WHY YOU'LL LOVE IT

The Evinrude E-TEC 90HP is one of the most popular mid-range outboards available thanks to its lightweight design, responsive performance, and exceptional reliability. It's powerful enough for a wide range of boats while remaining economical to own and operate.

PERFORMANCE & APPLICATIONS

Ideal for:

• Aluminum Fishing Boats
• Bay Boats
• Center Consoles
• Pontoon Boats
• Skiffs
• Utility Boats
• Workboats
• Recreational Fishing Boats

This engine provides smooth acceleration, dependable cruising performance, and excellent fuel efficiency for both recreational and commercial boating.

COMPATIBLE BOAT TYPES

Recommended for:

• 16–22 ft Aluminum Boats
• Bay Boats
• Center Consoles
• Flats Boats
• Pontoon Boats
• Utility Boats
• Small Commercial Boats

CONDITION

This is a used 2013 Evinrude E-TEC 90HP Outboard Motor in excellent mechanical condition.

The engine has been professionally inspected, compression tested, and confirmed to be in excellent running condition. It starts easily, idles smoothly, shifts correctly, pumps water properly, and is fully prepared for immediate installation.

WHAT'S INCLUDED

This motor is sold as a complete, ready-to-mount-and-run package.

Included with your purchase:

• 2013 Evinrude E-TEC 90HP Outboard Motor
• Remote Control Unit
• Main Wiring Harness
• Ignition Key Switch
• Control Cables
• Stainless Steel Propeller
• Battery Cables
• Power Trim & Tilt System
• Standard Mounting Hardware
• Complete Rigging Package

Everything required for a professional installation is included.

SHIPPING INFORMATION

We offer flat-rate shipping of $350 per motor throughout the continental United States.

For all shipping enquiries, please contact:

Email: support@ezboatsmarine.com

IMPORTANT DELIVERY INFORMATION

Please inspect your shipment carefully before signing the freight carrier's delivery receipt. Any visible damage should be noted immediately. If concealed damage is discovered after delivery, contact EZ Boats Marine promptly so we can assist with the freight claim process.

WHY BUY FROM EZ BOATS MARINE?

EZ Boats Marine is committed to supplying premium new and used outboard motors that are professionally inspected and accurately described. We provide competitive pricing, secure nationwide shipping, and knowledgeable customer support to help you purchase with confidence.

FREQUENTLY ASKED QUESTIONS

Is this engine ready to install?

Yes. This outboard is sold as a complete, ready-to-mount-and-run package with the remote control unit, wiring harness, ignition key switch, control cables, propeller, battery cables, and standard rigging included.

Has the engine been tested?

Yes. The engine has been professionally inspected and compression tested, confirming excellent internal condition and reliable operation.

What type of fuel system does this engine use?

It features Evinrude's advanced Electronic Fuel Injection (E-TEC) system, providing excellent fuel economy, quick starting, and smooth performance.

Do you ship throughout the United States?

Yes. We offer flat-rate shipping of $350 per motor throughout the continental United States.

How can I get more information before purchasing?

For additional photos, compatibility advice, or shipping information, please contact:

Email: support@ezboatsmarine.com